Arrow Pullers and Arrow Lube
Getting your arrow out of the target can be tougher than getting it in!

Lube Tube Arrow Lubricant

Cardoza Lube Tube arrow lubricant comes in a dandy little aluminium tube that contains a solution of silicone which lubricates your arrows making them easier to remove from any archery target. Regular use of the Lube Tube will also help to keep your arrows clean and bright and much less prone to damage. It even makes pulling carbon arrows from foam 3-D targets a breeze.

To use, simply insert the tip of your arrow into the top of the tube and give it a twist. This coats the tip with a layer of slippery silicone making arrow retrieval a simple two-finger affair. Attaches to your belt or quiver with a handy clip.

Martin Arrow Puller

The Martin Arrow Puller is a bit tougher than some of the others carried by NZAP and is only slight more dear. Easily removes arrows from any type of target butts and is especially effective at getting stubborn carbon arrows out of foam 3D targets. Attaches securely to your belt or quiver with a handy plastic clip.

Arrow pullers work by giving your hand a larger and firmer grip on your arrow shaft, which increases the mechanical advantage making arrows much easier to remove from any target. Regular use of a puller will also prevent damage to your arrows caused by pulling arrows fro the target at the wrong angle.

Cartel Arrow Puller

The Cartel Arrow Puller is a useful and economical way to solve the problem of setting stuck arrows out of a target without damaging them by bending or twisting. Here is a very useful item, especially if you use carbon arrows on 3D targets. Makes retrieving any arrow from any substance a snap. Includes a handy belt clip.

Arrow pullers work by giving your hand a larger and firmer grip on your arrow shaft, which increases the mechanical advantage making arrows much easier to remove from any target. Regular use of a puller will also prevent damage to your arrows caused by pulling arrows from the target at the wrong angle.

An arrow puller is a must-have tool for every archery kit box.

Gorilla Grip Arrow Puller

The Gorilla Grip Arrow Puller is a bit more robust than the Cartel Arrow Puller listed above. It has a larger diameter and a natural-rubber no-slip grip that gives you more pulling force. The hand-filling Gorilla Grip allows maximum grip strength on large diameter arrows but works on all arrow sizes.

This one is a must-have item for 3D shooters as it greatly facilitates the removal of both carbon and aluminium arrows from the dense foam used to manufacture 3D animal targets.

Includes a handy steel clip for attaching the puller to your quiver or belt.

Retract-A-Grabber Arrow Puller

The Retract-A-Grabber Arrow Puller from Vista Archery is the best thing to happen to arrow pullers since the opposable thumb.

Have you ever gone to pull your arrows from target No. 15 and discovered you have left your arrow puller back at target No. 14? Who hasn't! The problem with arrow pullers is where to put the bloody things when you aren't pulling arrows. Here comes the answer from Vista Archery Products: The Retract-A-Grabber Arrow Puller lives at the end of a retractable cord so not only is it right there when you need it, but it is permanently attached to your quiver or your belt (or anything else you fancy attaching it to) so it is practically impossible to loose.