The Easton X7 Target Stabiliser combines a precision machined body of aerospace aluminium alloy and the time-tested AVRS (Advanced Vibration Reduction System) technology. The result is smooth shooting and tight groups from a lightweight small-dimeter stabiliser.
The small diameter of the X7 means less air resistance so using it in any cross wind will mean you have a considerable advantage over opponents using fatter stabilisers. The 25-inch version weighs only 6.1 ounces ( 173 grams) and the 30-inch version weighs only 6.8 ounces ( 193 grams).
The alloy body provides a lightweight base for any combination of side rods and end weights you need for optimum bow-stabilizing performance, plus the detailed chrome Permagraphics pattern will stand out on the shooting line. Available in two popular25 and 30 inch lengths.
Use this Easton X7 V-Bar Extender to move your stabilizer V-bar away from your riser for added balance and control without adding a lot of weight. it is 4-inches long and weighs only 1.5 ounces ( 43 grams).
These Easton X7 Stabilizer Side Rods can be used singly if you need a light stabiliser for a small bow but the more common use is in pairs with one of the V Bars shown below to provide lateral and rearward stabilisation with a standard target bow setup.
These work equally well with recurve and compound bows. They are 10 inches (25cm) long and weigh only 2.3 ounces (65 grams) not counting the end cap (included).
The Easton Stabilizer V-Bar works great with the X7 Stabilizer System as well as with the Cartel stabilisers listed below.
The Easton V Bar comes with a lack anodized finish in a 35-degree flat version that keeps your side rods on the same plane as the main stabiliser, and in a 35-degree angled version, which lets your side rods slope downward by 17 degrees. A stainless-steel connector bolt for attaching the V-Bar to your riser is included.
The Cartel Carbon Stabilizers are second to none when it comes to performance. Each stabiliser is precision machined from aircraft grade aluminium and features a unique ring-shaped shock-absorbing system that soaks up vibrations on all frequencies.
Cartel carbon stabilizers feature a new rubber-injected inside lining that further absorbs vibrations and noise. The Cartel is the best priced carbon stabilizer on the market today.
Outside diameter is 1/2 inch (12.7mm), colour is black and is available in 26, 28, or 30-inch lengths. Includes 3 black cap stackable end weights.
The Cartel Short Carbon Stabilizers are second to none when it comes to performance and can be used as a shorter front stabiliser or in pairs with a V Bar as side rods. Each stabiliser is precision machined from aircraft grade aluminium and features a unique ring-shaped shock-absorbing system that absorbs vibrations on all frequencies.
Cartel carbon stabilizers feature a new rubber-injected inside lining that further absorbs vibrations and noise. The Cartel is the best priced short carbon stabilizer on the market today.
Outside diameter is 1/2 inch (12.7mm), colour is black and is available in 7, 10, or 12-inch lengths. Each stabiliser comes with 3 stackable end weights.
Cartel tell us that these Shock Eater Stabilisers are the best shock absorbing stabilizers on the market. They work great alone as a short stabiliser or with a long stabiliser and v-bar as side rods.
Features of the Shock Eater are a new flexible body in black anodised aluminium and specially designed vibration disbursement rings that dissipate vibration and quiet noise.
Shock Eaters are available from NZAP in 7, 10, or 12 inch lengths.
Stabiliser extenders are used for lengthening your current stabiliser or to mount a V-Bar system in front of your bow. Placed between the stabiliser or V-bar and bow riser, the extender changes the balance of your bow.
Many archers put an extender and a shock eater together to make a short but very effective stabilizer/shock eater combination. Black. 3,4, or 5 inch lengths available.
This top-quality, precision-machined V-Bar from Cartel is the ultimate in tune-ability as with a simple allan key, you can adjust your side rods to just about any angle that gives you the best balance and performance.
The Cartel Deluxe V-Bar becomes part of a unique stabiliser tuning system can be adjusted up, down, left or right and can be set at any angle the archer prefers. Combine it with the Shock Eater or Easton side rods for an effective and accurate stabiliser set-up.
This Cartel Standard V-Bar is your basic non-adjustable v-bar with a 35 degree side angle for a 70 degree side-rod spread and your choice of flat or 15 degrees down.
The standard v bar is quick and easy to install. Machined from high quality aluminium with a chromed steel locking bolt. Basic but very effective, reliable and trouble free. Available colours are black and silver.
These Stabiliser Caps and End Weights from Cartel fit the Cartel Carbon Stabiliser above and many others. Come in .8 inch (20mm) and 1 inch (25mm) sizes; in sets of one cap and one weight each.
Developing a target stabiliser system is a personal matter and the ultimate is arrived at only after a lot of trial and error. But beware! The trials can be long and the errors can be expensive.
Start with a moderate poker of 26 or 28 inches. You can add extenders to make it longer but you can't make it shorter. Add one component at a time and try different end weights on both the poker and the side bars. The general rule is that the bow when held loosely between the thumb and forefinger should tilt forward at a 45 degree angle, but like all general rules, this should be adapted to your specific preferences.
Give yourself plenty of time (a thousand shots or so) to get used to each item before making changes or going on to the next. Take it slow and don't expect miracles and eventually you will have the perfect stabiliser system.