Fibre Optic Material
Archery Sight Level
Circles and Dots from Specialty Archery
HHA Blue Burst Sight Light
HHA Optimiser Sight  Lens Kit B
Archery Tips and Tricks from NZAP


Items on this page--click to go
 
Fibre Optic Sight Accessories

Replacement Cable for Fibre-Optic Sight Pins

These fibre-optic replacement elements are from TruGlo but you can use them to repair just about any sight pin that uses .019 or .029 diameter material. These come in packets of five colours with each pack including 1 red, 1 green, 1 yellow, 1 ruby red, and 1 orange and in your choice of diameters. Each piece is 5 1/2 inches (140mm) long.

Where it is possible, we will sell single pieces of fibre optic material but we will not be able to break up a five pack to do so. Thus, if you are ordering a single element instead of the entire set, it is a very good idea to give us an alternate colour in the remarks section. Red is particularly hard to find outside a set.

Price:$29.95 (AU$23.95) for Five Pack
Size: Add to Cart

Price:$7.95 (AU$6.35) Each (Limited Availability)
Size: Colour: Add to Cart

Free Shipping

The Australian Price on this Item reflects the differences in the exchange rate and GST between New Zealand and Australia.

Don't forget! Shipping is free on this item to anywhere in New Zealand or Australia if your order is over $250.00. Click the kanga for details

Archery Sight Level

Level for Archery Sight

 

This sight level comes from Cobra but will fit most other sights that have a vertical pin slot.

Sight levels are used by target archers and bowhunters to insure that the bow is being held perfectly perpendicular when the arrow is released, insuring shot-to-shot consistency and a resulting increase in accuracy.

Price:$24.95 (AU$19.95) Each
Add to Cart

Free Shipping

The Australian Price on this Item reflects the differences in the exchange rate and GST between New Zealand and Australia.

Don't forget! Shipping is free on this item to anywhere in New Zealand or Australia if your order is over $250.00. Click the kanga for details

Circles and Dots from Specialty Archery

Specialty Archery Circles and Dots

 

This mixed set of Circles and Dots from Specialty Archery ("Dependable Products for Winning Results") contains one strip each of orange, black, and yellow vinyl circles and dots target-lens transfer decals.

Each strip consists of 12 circles and 14 dots so you can perfectly match every shooting and light condition.

Price $27.95 (AU$22.35)
Add to Basket

Free Shipping

The Australian Price on this Item reflects the differences in the exchange rate and GST between New Zealand and Australia.

Don't forget! Shipping is free on this item to anywhere in New Zealand or Australia if your order is over $250.00. Click the kanga for details

Circles and Dots for Target Archery Scopes

Circles and Dots

This dandy set of peel-and-stick circles and dots contains a variety of sizes to fit any scope lens and accommodate the most demanding target archer.

Each package includes two complete sets of peel-and-stick circles and dots, one in black and another in high-visibility orange.

Price $19.95 (AU$15.95)
Add to Basket

Free Shipping

The Australian Price on this Item reflects the differences in the exchange rate and GST between New Zealand and Australia.

Don't forget! Shipping is free on this item to anywhere in New Zealand or Australia if your order is over $250.00. Click the kanga for details

TruGlo Tru-Lite Extreme Sight Light

Tru-Glo Tru-Lite Extreme Sight Light

The Tru-Glo Tru-Lite Extreme is probably the most versatile sight light made. It not only fits Tru-Glo sights but most other popular brands of bow sights as well. Each Tru-Lite comes with three adapters in sizes 3/8"-32, 3/8"-36 and 7/16"-20 for attaching to sights by Copper John, PSE, Spot-Hogg,Trophy Ridge, and many other brands.

The Tru-Glo Tru-Lite Extreme features an adjustable rheostat that allows the shooter to adjust light intensity over an infinite range of brightness settings and a purple (violet really) LED gives a soft glow to the pins that won't strain your eyes or cause blind spots.

Price:$49.95(AU$39.95)
Add to Cart

Free Shipping

The Australian Price on this Item reflects the differences in the exchange rate and GST between New Zealand and Australia.

Don't forget! Shipping is free on this item to anywhere in New Zealand or Australia if your order is over $250.00. Click the kanga for details

TruGlo Tru-Lite Extreme Sight Light

TruGlo Tru-Lite Sight Light

The TruGlo Tru-Lite is very similat to the Tru-Lite Extreme listed above in that it not only fits TruGlo sights but most other popular brands of bow sights as well. Each Tru-Lite and Tru-Lite Extreme comes with three adapters in sizes 3/8"-32, 3/8"-36 and 7/16"-20 for attaching to sights by Copper John, PSE, Spot-Hogg,Trophy Ridge, and many other brands.

The TruGlo Tru-Lite does not have the adjustable rheostat dominant feature of the Tru-Lite Extreme, so it isn't quite as dear.

Price:$29.95(AU$23.95)
Add to Cart

Free Shipping

The Australian Price on this Item reflects the differences in the exchange rate and GST between New Zealand and Australia.

Don't forget! Shipping is free on this item to anywhere in New Zealand or Australia if your order is over $250.00. Click the kanga for details

HHA Blue Burst Sight Light

HHA Blue Burst Sight Light

The HHA Blue Burst sight light is made from black anodised machined aluminium. The mounting bracket is screwed to exterior of your pin housing and a blue bulb illuminates the fiber optic coils. The Blue Burst fits all current models of the HHA Optimiser line except the OL-3000. This sight light is a useful aid for bowhunting after dark or in the deep bush.

The Blue Burst includes two batteries and features a rheostat so that the brightness of the sight pin can be easily controlled.

Price:$69.95 (AU$55.95)
Add to Cart

Free Shipping

The Australian Price on this Item reflects the differences in the exchange rate and GST between New Zealand and Australia.

Don't forget! Shipping is free on this item to anywhere in New Zealand or Australia if your order is over $250.00. Click the kanga for details

HHA Optimiser Sight  Lens Kit B

HHA Optimiser Lens Kit B

The HHA Lens Kit B uses hand-crafted Feather Vision Lenses with unmatched clarity and durability for bowhunters and target archers. Lens Kit B is available in 2, 4, and 6 power and features an anti-reflective coating that is scratch resistant and completely water proof. Feather Vision lenses are made from the finest optical-grade polycarbonate available and carry a one year warranty against scratching.

Lens Kit B fits all 1 5/8 inch sight housings except the OL-3000. This is a special-order item. Please allow three to four weeks for delivery.

Price:$199.95(AU$359.95)
Magnification: Add to Cart

Free Shipping

The Australian Price on this Item reflects the differences in the exchange rate and GST between New Zealand and Australia.

Don't forget! Shipping is free on this item to anywhere in New Zealand or Australia if your order is over $250.00. Click the kanga for details

Archery Tips and Tricks from NZAP QUICK TIPS

How to Level Your Sight Level

Whether you use your bow for hunting or you are a serious target archer, it is important that your sight be mounted perfectly parallel to your bowstring and perpendicular to the horizon. An out-of-alignment sight will result in horizontal movement of your groups from pin to pin with a multi-pin sight or at different range settings with a target sight. Fortunately, adjusting your sight to parallel isn't difficult if your sight is fitted with a bubble level and you follow these simple steps:

  1. First make sure your bow is perfectly tuned, or as close to perfect as you can get it, paying particular attention to proper brace height (this is true for both compound bows and recurves).
  2. Next mount your bow in a sturdy bow vice or in a well-padded wood-working vice so that the string is perfectly perpendicular to horizontal.
  3. With a target sight or hunting that has third-axis adjustment, simply rotate the pin group or pin block to align the bubble and you are done.

Third-axis adjustment is usually only available on more expensive sights, so if your sight doesn't have this feature, you will need to shim the sight base as follows:

  1. Follow steps one and two as above.
  2. Cut several shims from a plastic milk bottle (or any similar material) approximately 8mm wide and as long as the area of your sight base that contacts your riser.
  3. Loosen the two screws that hold your sight base to your riser. If your level bubble is to the right of the middle (as viewed from the shooting position on a right-handed bow-reverse for a left-handed bow) place a single shim under the bottom mounting screw between the base and the riser. If the bubble is to the left of centre, place the shim above the top mounting screw.
  4. Tighten the mounting screws and recheck the bubble. If needed, simply add more shims until your bubble is centred in the level housing.

You are now ready to go to the range and bask in the glory of higher scores and tighter groups at all ranges.

Cheers and a $10 voucher to Dennis from Melbourne