Vibration-control devices, such as LimbSavers, Bowjax and ThunderBlox, are used to reduce felt vibration and noise in your bow. Practically any bow, compound or recurve, will benefit from the installation of these simple devices. Install them on the outboard end of your limbs about two thirds of the distance from the riser to the tips making sure that they are located on a flat section of the limb where they won't interfere with cables or strings.
The solid-limb Limbjax was the original limb-dampening device developed by Bowjax and the one that put the company on the archery map. Limbjax attach securely to the limbs of your bow by amazingly strong peel-and-stick adhesive. The four arms absorb the shock of a shot to reduce noise and vibration caused by the energy being released by the bow limb.
With the introduction of new slim-limb compound bows such as the Mathews DXT and Reezen a redesigned BowJax was needed to fit the new profile. So, building on the success of the original Limbjax, the engineers at Bowjax developed the Bowjax Slimjax solid limb dampener.
Bowjax research proved that a dampener with arms that contact the limb as they vibrate is far more effective at reducing noise and vibration than one that has no contact with the limb. This contact was designed into the Slimjax making it the most effective limb dampener system on the market. And the Slimjax works just well on traditional recurve bows as they do on modern high-speed compound bows.
The Monsterjax is a further refinement of the Limbjax with a patent-pending design that demonstrates how the engineers at Bowjax are constantly developing new ways to apply and improve limb-dampening technology. The new Monsterjax works with six independent arms of different lengths that vibrate at different frequencies so noise and harmful oscillations are dampened out and eliminated across the entire spectrum of vibration frequencies. Solid limb Monsterjax should be placed on the flat part of the limb between the cam and the limb pocket. For maximum dampening effectiveness, Monsterjax should be oriented as shown in The photo. Split limb Monsterjax should be placed about 1 1/2" from the cam or wheel on the limb.
This new LimbSaver Ultra Quad is the paramount accessory for dampening vibration, shock and excess noise. The Ultra Quad absorbs vibration then dampens it away with four independently moving sections that shut down harmful vibration faster than ever.
With bow technology increasing to new levels of performance and speed every time a new model hits the bow rack, make sure you keep up with the latest technology in damping accessories with the latest offering from Sims. This one achieves up to 50% reduction of noise and vibration over the original LimbSaver designs. Available in black and camo.
The new LimbSaver ULTRA is a dramatic improvement over all previous LimbSaver designs, and outperforms all of the competition…guaranteed.
The new ULTRA reduces limb shock and vibration by up to 80%, and reduces noise by up to 20db. Engineered to incorporate a new specialised geometric design for greater 360° movement, the Ultra uses patented LimbSaver technology, and the Sims' proprietary Navcom material. Available in black only.
This medium-sized LimbSaver is just right for recurves and smaller compound bows and is perfect for large accessories where the Mini LimbSaver is not quite enough to do the job but where a full-sized LimbSaver is a bit too much.
Built with NAVCOM (Noise and Vibration Control Material). Comes in a packet of two. Easy peel-and-stick application.
The Mini LimbSaver is Sims' smallest vibration dampener and is designed to remove the vibration and resulting noise from all accessories including sights, rests, quivers, most cams, etc. The Mini LimbSavers allow you to customise your bow for maximum sound and vibration reduction in small out of the way places.
Built with NAVCOM™ (Noise and Vibration Control Material). Comes in a packet of three. Easy peel-and-stick application.
AlphaShox by Sims Laboratories are designed for Hoyt split-limb bows with 3/4″ spacing between the limbs. This new design allows easy installation without requiring additional brackets.
The LimbSaver AlphaShox fits snugly between Hoyt’s split limbs removing excess vibration and noise. The result is a smoother, quieter and more accurate shot. A quick and easy way to upgrade your old Hoyt. Available in black or camo.
The Australian Price on this Item reflects the differences in the exchange rate and GST between New Zealand and Australia.
Don't forget! Shipping is free on this item to anywhere in New Zealand or Australia if your order is over $250.00. Click the kanga for details
Whisper quiet, durable, and a breeze to install, ThunderBlox are the ultimate vibration dampening and limb silencing system. ThunderBlox reduces shot noise by up to 75% with virtually no energy loss or reduction in speed versus an unsilenced bow. ThunderBlox also reduce damaging limb shock by over 30%.
The Australian Price on this Item reflects the differences in the exchange rate and GST between New Zealand and Australia.
Don't forget! Shipping is free on this item to anywhere in New Zealand or Australia if your order is over $250.00. Click the kanga for details
Silencing devices such as Limb Savers, AlphaShox, ThunderBlox, string silencers, and vibration-absorbing stabilisers are a great way to remove that last bit of noise and vibration from your bow. However, if you have a noisy bow, make sure you get it tuned properly before installing silencers.
Trying to quiet a noisy out-of-tune bow by installing silencing devices will work only up to a point and it will not help your bow or your shooting even a little bit.