The ST Carbon Epic is your best bet for an Easton all-carbon hunting arrow at a reasonable price. ST Epic is available in five sizes so finding just the right arrows for your bow is that much easier, and you have the advantage of the smaller diameter slim technology shaft and HP inserts adding a higher level of accuracy and penetration in a durable field and hunting arrow. In the 600 size the ST Epic is an NZAP best buy for the young bowhunter or any shooters using lower poundage bows.
New N-Fused Epic arrows are the first Easton arrows to use carbon nanotubes for increased strength in a bowhunting shaft. ST Epic are much stronger than ordinary carbon arrows because carbon nanotubes are the strongest, lightest substance known to science.
Unless you are ordering bare shafts, the price below is for a complete ready-to-shoot Easton arrow and includes fletching to your specifications with Elite Plastifletch, Bohning Killer Vanes, Blazer Vanes Or Duravanes, a nock, a HP insert, and a field point. There is a slight additional charge for feather fletching and for QuickSpin Vanes. If you prefer to make your own arrows, Easton ST Epics are also available as a bare shaft with nock and HP insert included in the price.
Easton ST Epic Arrows are available from NZAP in five sizes: 600, 500, 400, 340, and 300.
Easton Arrows: ST Epic Features:
- Easton H Nock Pre Installed.
- An RPS Field Point is included in the NZAP price.
- Straightness: ± .003" Guaranteed max
- Built from High-strength nanotubes infused carbon-composite fibers for strength and durability
- Weight tolerance: ± 2.0 grains for consistency and tight groups
- Easton's best-value all-carbon hunting arrow
| Size | Shaft Weight | Spine Span | Stock Length | Nock | Insert | RPS Point |
|---|---|---|---|---|---|---|
| Grains | Deflection in Inches | Inches | Grains | Type | O.D. Inches | |
| 600 | 6.4 | 0.600 | 30 3/8 | 9 | HP-3 | 9/32 |
| 500 | 7.3 | 0.500 | 30 7/8 | 9 | HP-3 | 9/32 |
| 400 | 8.6 | 0.400 | 31 7/8 | 9 | HP-4 | 9/32 |
| 340 | 9.5 | 0.340 | 31 7/8 | 9 | HP-4 | 9/32 |
| 300 | 10 | 0.300 | 32 3/8 | 9 | HP-4 | 9/32 |
Prices for Easton ST Epic Arrows
- 1 to 5 Easton ST Epic Arrows: $16.00 (AU$12.80) Each*
- 6 to 11 Easton ST Epic Arrows: $14.00 (AU$11.20) Each*
- 12 or more Easton ST Epic Arrows: $12.00 (AU$9.60) Each*
- Easton ST Epic Bare Shafts: As Low as $10.00 (AU$8.00) Each
* These prices include fletching to your specifications with Elite Plastifletch, Bohning Killer Vanes, Blazer Vanes Or Duravanes, plus a nock, an insert, and a field point. There is a slight additional charge for NAP QuickSpin vanes and feather fletching.
| To Order Your ST Epic Arrows First Select Your Favourite Fletching | |||||
|---|---|---|---|---|---|
|
AAE Elite Plastifletch |
Bohning Killer Vanes or Blazer Vanes |
Duravane Vanes | QuickSpin Vanes |
Gateway Feathers |
Shafts Only No Fletching or Points |
The Australian Price on this Item reflects the differences in the exchange rate and GST between New Zealand and Australia.
Don't forget! Shipping is free on this item to anywhere in New Zealand or Australia if your order is over $250.00. Click the kanga for details
QUICK TIP
Fletching Small-Diameter Bowhunting Shafts
If you fletch your own Easton Arrows and are using any of the ST (Slim Technology) shafts, (i.e., ST Carbon Excel, ST Carbon Epic, ST Epic, and the Epic Full Metal Jacket) don't try to get a full-helical fletch with four-inch vanes. Because of the thinner shaft, it can be difficult to get full base contact with your fletch when using a right or left helical jig.
In most cases you will be better off using a straight clamp with as much offset as you can get while still maintaining complete base contact. With shorter fletching, such as the Bohning Blazer Vanes and Gateway Rayzrs, the full helical clamps will work fine and are recommended.