Serving Australia and New Zealand
Gold Tip Expedition Hunter Camo Arrows
The Toughest Arrows You'll Ever Shoot.
The Expedition Hunter APG Realtree is the entry level bowhunting and field archery arrow from Gold Tip in a realistic Realtree camo finish. All Expedition Hunter shafts are constructed of wrapped carbon fibres to tolerances most bowhunters will find acceptable. This is the arrow for bowhunters who want a camo graphite hunting arrow without spending a lot of money. Gold Tip Hunters are a quality arrow for a budget price. All Expedition Hunter arrows are hand weighed to within +/- 2 grains and finished using state-of-the-art ultrasonic system that gives the exterior of the shaft a smooth, clean, glare-free surface. Straightness tolerance is an acceptable +/-.006”, and is available in three sizes, 3555, 5575 and 7595. If you don't know the size you need, ring us on the free phone for assistance.
Expedition Hunter arrows from NZAP come complete with a Gold Tip Nock, a GT Series insert, the fletching of your choice, and a field point, or if you prefer, a 100-grain Gold Tip field point (let us know about it in the remarks).
Unless you are ordering bare shafts, the price below is for a complete ready-to-shoot arrow and includes fletching to your specifications with Elite Plastifletch, Bohning Killer Vanes, Blazer Vanes Or Duravanes, a nock, a HP insert, and a field point. There is a slight additional charge for feather fletching and for QuickSpin Vanes. If you prefer to make you own arrows, Gold Tip Hunter Camos are also available as a bare shaft with nock and GT insert included in the price.
Gold Tip Expedition Hunter APG Realtree arrows and shafts are available from NZAP in three sizes: 3555, 5575 and 75950.
Gold Tip Expedition Hunter Realtree Features:
- Gold Tip Nock Pre Installed.
- A Field Point is included in the NZAP price of the arrows.
- Straightness: ± .006" max
- Built from wrapped carbon fibres for strength and durability
- Built to exacting weight and straightness specifications
- Gold Tip's best-value all-carbon hunting arrow
| Size | Shaft Weight | Spine Span | Stock Length | Diameter | Diameter | Diameter |
|---|---|---|---|---|---|---|
| Grains Per Inch | Deflection in Inches | Inches | Outside | Inside | Point | |
| 3555 | 8.2 | 0.500 | 30" | .291" | .246" | 5/16 |
| 5575 | 8.4 | 0.400 | 32 | .295" | 246 | 5/16 |
| 7595 | 10.2 | 0.340 | 32 | .300 | .246 | 5/16 |
Prices for Gold Tip Hunter Camo Arrows
- 1 to 5 GT Expedition Hunter Camo Arrows: $16.95 (AU$13.55) Each
- 6 to 11 GT Expedition Hunter Camo Arrows: $14.95 (AU$11.95) Each
- 12 or more GT Expedition Hunter Camo Arrows: $12.95 (AU$10.35) Each
- Gold Tip Hunter Camo Bare Shafts: As Low as $11.95 (AU$7.95) Each
* These prices include fletching to your specifications with Elite Plastifletch, Bohning Killer Vanes, Blazer Vanes Or Duravanes, plus a nock, an insert, and a field point. There is a slight additional charge for NAP QuickSpin vanes and feather fletching.
| To Order Your Gold Tip Arrows First Select Your Favourite Fletching | |||||
|---|---|---|---|---|---|
|
AAE Elite Plastifletch |
Killer Vanes or Blazer Vanes |
Duravane Vanes | QuickSpin Vanes |
Gateway Feathers |
Shafts Only No Fletching or Points |
The Australian Price on this Item reflects the differences in the exchange rate and GST between New Zealand and Australia.
Don't forget! Shipping is free on this item to anywhere in New Zealand or Australia if your order is over $250.00. Click the kanga for details
QUICK TIP
Installing Inserts in Carbon Shafts
Installing inserts in carbon arrow shafts is easy and straightforward. Always clean the inside of the shaft with a bronze bore brush (sold in Hunting and Fishing Stores and gun shops) and use a high-quality slow-setting epoxy. The five-minuet type of household epoxy is brittle and won't hold well. WEST System or Epiglass marine epoxies (sold in marine stores) both work very well as does the one sold by Easton. Super glue also works OK and is recommended by gold Tip. Be careful though. Super glue sets very quickly and if you don't get it right the first time, it can ruin your shaft.
After installing the insert, let the glue cure for at least 24 hours before using the arrows or even screwing in the point. This is especially important with Easton HIT inserts used in the Axis Full Metal Jacket (FMJ) arrows and the ST Axis arrows.
If you get epoxy inside the insert you won't be able to screw in the point. You can fix this easily by chasing out the threads with a 8-32 National Course tap (UNC Imperial), available from any engineering supply for a few dollars.