Arrow Inserts
For Replaceable Points and Broadheads

Easton RPS Inserts for Aluminium Arrows

Easton RPS Aluminium Inserts are an aluminium insert with an 8/32 internal thread based on the Easton Replaceable Point System and are designed for the Easton ST Excel arrow shafts. Using these inserts with your aluminium arrow shafts makes the points interchangeable with just about any arrow point or broadhead made.

Easton RPS ST Inserts for Excel Carbon Arrows

Easton RPS Aluminium Inserts are the aluminium inserts with an 8/32 internal thread based on the Easton Replaceable Point System. Using these inserts with your carbon arrow shafts makes the points interchangeable with just about any arrow point or broadhead made. ST inserts are designed primarily for the Easton ST Excel arrows but they will also fit Easton ST Epic Arrows.

Easton HP Inserts for ST Epic Carbon Arrows

Easton HP Inserts are an aluminium insert with an 8/32 internal thread based on the Easton Replaceable Point System but are longer and are machined to a higher standard of precision than the regular RPS inserts. HP inserts and are designed for the Easton ST Epic arrow shafts with Nano-Tube construction, but they are an excellent way to up grade your St Excel arrows as well. Using these inserts with your aluminium arrow shafts makes the points interchangeable with just about any arrow point or broadhead made.

HP inserts come in three sizes. HP-4 are intended for the Epic 300 and 340 shaft sizes and HP-3 are intended for the ST Epic 400, 500, and 600 sizes and the ACC Pro Hunter sizes 300 and 340. The HP-2 is intended for ACC Pro Hunter sizes 440 and 390 shafts.

Easton CB Inserts for LightSpeed Arrows

Easton CB aluminium Inserts have a 8/32 internal thread based on the Easton Replaceable Point System. CB inserts fit the Easton LightSpeed Arrows and the FlatLine, PowerFlight, LightSpeed and LightSpeed 3D, which ore not normally stocked by NZAP. CB Inserts also fit many other full dimension carbon shafts, such as the Gold Tip Hunter and the Carbon Impact FAT Shafts. Using these inserts with your carbon arrow shafts makes the points interchangeable with just about any arrow point or broadhead made.

Easton CB Microlite Inserts for ST Epic Carbon Arrows

Easton CB Microlite Inserts are an aluminium insert with an 8/32 internal thread based on the Easton Replaceable Point System and weigh 45 percent less than the standard CB inserts. Easton CB Microlite Inserts fit the Easton LightSpeed Arrows and the FlatLine, PowerFlight, LightSpeed and LightSpeed 3D, which ore not normally stocked by NZAP. CB Microlite Inserts also fit many other full dimension carbon shafts, such as the Gold Tip Hunter and the Carbon Impact FAT Shafts. Using these inserts with your aluminium arrow shafts makes the points interchangeable with just about any arrow point or broadhead made.

HP inserts come in three sizes. HP-4 are intended for the Epic 300 and 340 shaft sizes and HP-3 are intended for the ST Epic 400, 500, and 600 sizes and the ACC Pro Hunter sizes 300 and 340. The HP-2 is intended for ACC Pro Hunter sizes 440 and 390 shafts.

Gold Tip Inserts for GT Hunter and XT Arrows

These aluminium inserts from Gold Tip fit the .246 inside diameter shafts we sell. They have a slight flair so that 5/16 inch points fit perfectly. This makes the point 1/64 inch larger than the shaft for easy pulling from targets.

Using these inserts with your carbon arrow shafts makes the points interchangeable with just about any arrow point or broadhead made.

Brass Weighted Inserts

Here is a great way to add some weight to the point of your carbon shafts without increasing the size of the point itself. These brass inserts from Muzzy come in two sizes, 50 grains and 100 grains, and will fit in most standard dimension carbon shafts including Easton LightSpeed, Gold Tip Hunter and Hunter XT, and Carbon Impact. They also fit Easton FlatLine, PowerFlight, and LightSpeed 3D. Install them with epoxy, the same way that you do the standard aluminium ones, or add them to your arrow order and we will install them for you. Come in packets of six inserts.

Half-Out Inserts for A/C/C and Redline Arrows

Easton Half-Out Inserts are designed to allow the RPS interchangeable point system to be used on the smaller sizes of A/C/C and Redline arrows. A/C/Cs are becoming increasingly popular with bow hunters looking for the ultimate hunting shaft, and the Half-Out inserts permit field and target points to be easily changed to a broadhead. Half-Out inserts are available to fit A/C/C sizes 3-18, 3-28,3-39, and to fit Redline Sizes 600, 690, and 780.

Sold individually or by the 12 Pack.