Duravanes Fletching
For Bowhunting and Target Arrows

Fusion Vanes

The new Fusion Vane from Norway Industries offers a lot more than just an exciting new profile. Each vane is actually constructed from two sperate polymer plastics. The base of each vane is made from a soft and flexible material so that it conforms exactly to the shape of the shaft regardless of its diameter. You get the same adhesion on th thinnest carbon shafts as you do on the big line cutters so popular with 3D shooters. The actual vane is constructed from a second polymer that is tough and durable to maximises flight characteristics and down-range performance.

The new Fusion vane is available in three sizes: the 1.5-inch will appeal to target shooters looking for the maximum performance from a small vane. The 1.5 Fusion weighs only about 3 grains and is .40-inch tall. (Note: The 1.5 Fusion is not in stock at the moment but will be here soon.) The 2.1-inch Fusion is .560-inch tall and weighs about 7 grains. With its high profile, the 2.1-inch Fusion is designed for bowhunters looking for maximum control of broadhead flight at the lightest weight available. The 3-inch Fusion weighs approximately 8 grains and is .450-inch tall, perfect for steering light broadheads on thin carbon shafts and for use as a general field vane. As with all the vanes we carry, we try to keep an adequate stock of all colours but we are bound to run our of certain ones from time to time so it's a good idea to give us an alternate, just in case we don't have your first choice readily available.

If you like to fletch your own arrows you will enjoy the quick and easy application of the Fusion vane. Because of the two-part construction the special plastic used on the base of the vane needs no primer nor do you have to clean or otherwise treat the base of the vane. (You still must carefully clean the shaft, of course.) Because there is no primer used on the base, Fusion vanes have an unlimited shelf life.

NZAP have all three sizes of Fusion Vanes available in packs of 12 or 36 vanes each.

Duravanes

Duravanes, from Norway Industries, come in three popular sizes: three-inch, four-inch, and five-inch. They are softer and more flexible than the Bohning Blazer, Killer and X Vanes and are the preferred vane of many target archers and Bowhunters.

Duravanes feature a gradual taper that runs from the base of the vane to the top, which increases the steering power of the vane while reducing weight. This means that you can often go to a smaller, thus lighter, vane for any given shaft size and expect the same degree of performance. The tapered design also reduces or eliminates fluttering and the resulting vane noise. We try to carry all of the colours available in 3, 4, and 5 inches, but may run out of individual colours from time to time.

NZAP carry all three sizes of Duravanes in all the most popular colours in packs of 12 or 100 vanes each.