The Buzz-Off Cable Slide, from Saunders Archery, snaps on to any cable guard reptlacing any under-the-rod type of slide. Buzz-Off uses the Hyper-Glide cable cradle and ultra low-friction cable-rod wheel with flared cable-ports made from super-slick, super-quiet material that reduces cable wear. This stuff is smoother and slicker than any other material used on cable slides today and gives Buzz-Off the lowest rod friction, lowest cable wear and highest shooting consistency of any slide made.
Buzz-Off is more than a great slide because it deadens all vibration in the bowstring with Buzz-Off's unique gel-cap. The gel is protected by a soft, durable synthetic sheath. To keep the cap centered on the string, the offset arm it totally adjustable, It mounts for-or-aft, swings in and out and reaches forward-or-back. Rotating the cap's off-centered shank provides all the fine tuning you will need. Fitting Buzz Off to any bow with a rod-type cable guard is a piece-of-cake.
This amazing cable slide from Alpine Archery combines Teflon and rubber in a high-tech composite housing to make one of the best cable slides on the market. The Mach 5 Teflon Cable Slide is based on technology from the proven Alpine Glide Slide that has been a favorite of bowhunters and field archers for years.
This new slide features a Teflon slide surface press fit into a rubber vibration-dampening sleeve capped with a space-age slide body. It even has a hole drilled in it where you can attach the activating cord from a drop-away arrow rest, if you are using one. The Mach 5 Teflon Cable Slide fits all 3/8 diameter cable slides and is a snap to install.
Here is a basic slide that will do anything a slide should do. Designed to hold the cables on the inside of the cable guard so that they do not rub on the guard or each other greatly reducing friction and cable wear.
This cable slide is machined out of a solid block of 100% Teflon It is the best way yet to keep cables and your cable guard from premature wear. Works even better than expensive roller slides. Silent, Durable and Self-Lubricating, and easy to install.
Many users of this popular slide claim it is the best way ever of eliminating annoying cable-slide chatter and squeaks. Fully supports the cables and is guaranteed to eliminate slide noise.
This replacement cable guard attaches to the sight bushings and fits under the sight and quiver. An easy and effective to convert your bow from a lower cable guard to a more effective upper cable guard. Easy to install
A squeaky or chattering cable slide can not only be very annoying, it can also alert a bowhunter's quarry, break the concentration of a target archer, and rob your bow of power and performance. Sometimes a noisy slide can be cured easily with a drop of Teflon lubricant, such as Tri Flo. If that doesn't work, don't hesitate to replace your stock slide with one made of Teflon. It will quiet your bow and the reduced drag on the cable guard will add power to your shot and speed to your arrow. (OK, not a lot but every little bit counts.)